Spectra Precision HR1220 Laser Receiver

HR1220
£ 149.99
Receiver detects both red and green laser beams generated from crossline lasers

Spectra Precision HR1220 Laser Receiver

£124.99 (ex VAT) HR1220 Receiver

The Spectra Precision HR1220 Receiver detects both red and green laser beams generated from crossline lasers including the LT52R, LT52G, LT56, and LT58G. The receiver can extend the indoor working range of these crossline lasers as well as increasing versatility by allowing outdoor use.
 
APPLICATIONS
• Interior plumb, level, layout and square applications
• Exterior level, layout and square applications
• Decks, septic tank and swimming pool installation
• Drywall track and walls installation
• Cabinet and trim installation, finish carpentry
• Ceiling installation
• Garage and interior door installation
 
OUTFIT INCLUDES
• HR1220 Receiver
• C20 Clamp for Receiver
• 2 x AA-Batteries
 
FEATURES AND BENEFITS
• Receives Green beam and Red beam line lasers for versatility
• Front and rear LCDs provides easy viewing from either side
• Illuminated LCDs for easy-to-see readings in low light conditions
• Two accuracy selections to fit various jobsite requirements
• Large 3 inch (80 mm) reception height for quick beam acquisition
• Audio volume High, Low or Off for various jobsite conditions or individual preference
• Dual level bubbles for accurate horizontal and vertical readings
• Work indoors and outdoors for increased laser versatility
• Built-In magnets on top of receiver for attachment to ceiling grids or metal studs
• Includes rod clamp for attachment to grade rods and staffs
• Four-stage battery status indicates life of battery remaining
• Automatic shut-off when not in use conserves battery life
• Marking notches on each side at on-grade for easy transferring of 4 ft (1 m) marks
• All around over-molding protects the unit
 
TECHNICAL DATA
• ccuracy: ±1/16 in (±1.0 mm) ±1/8 in (±2.0 mm)
• Working Radius* *Laser dependent:165 ft. (50 m)
• Elevation Readout: Front and rear LCDs
• Audio Control: Loud / Low / Off
• Capture Height: 3.1 in. (80 mm)
• Marking Notches: 2.36 in. (60 mm) below top of receiver
• Power Source: Two 1.5-V batteries (type LR6/AA)
• Battery Life: 40+ hours
• Low-Battery Indicator: Battery symbol on LCD
• Automatic Shutoff: 30 minutes after last laser strike
• Drop Resistance: 1.5 m (5 ft) onto concrete at room temperature
• Water Proof / Dust Proof: Yes - IP66
• Operating Temperature:–14 °F to 122 °F (–10 °C to 50 °C)
• Storage Temperature: –4 °F to 158 °F (–20 °C to 70 °C)

 

Spectra Precision HR1220 Laser Receiver

£124.99 (ex VAT) HR1220 Receiver

The Spectra Precision HR1220 Receiver detects both red and green laser beams generated from crossline lasers including the LT52R, LT52G, LT56, and LT58G. The receiver can extend the indoor working range of these crossline lasers as well as increasing versatility by allowing outdoor use.
 
APPLICATIONS
• Interior plumb, level, layout and square applications
• Exterior level, layout and square applications
• Decks, septic tank and swimming pool installation
• Drywall track and walls installation
• Cabinet and trim installation, finish carpentry
• Ceiling installation
• Garage and interior door installation
 
OUTFIT INCLUDES
• HR1220 Receiver
• C20 Clamp for Receiver
• 2 x AA-Batteries
 
FEATURES AND BENEFITS
• Receives Green beam and Red beam line lasers for versatility
• Front and rear LCDs provides easy viewing from either side
• Illuminated LCDs for easy-to-see readings in low light conditions
• Two accuracy selections to fit various jobsite requirements
• Large 3 inch (80 mm) reception height for quick beam acquisition
• Audio volume High, Low or Off for various jobsite conditions or individual preference
• Dual level bubbles for accurate horizontal and vertical readings
• Work indoors and outdoors for increased laser versatility
• Built-In magnets on top of receiver for attachment to ceiling grids or metal studs
• Includes rod clamp for attachment to grade rods and staffs
• Four-stage battery status indicates life of battery remaining
• Automatic shut-off when not in use conserves battery life
• Marking notches on each side at on-grade for easy transferring of 4 ft (1 m) marks
• All around over-molding protects the unit
 
TECHNICAL DATA
• ccuracy: ±1/16 in (±1.0 mm) ±1/8 in (±2.0 mm)
• Working Radius* *Laser dependent:165 ft. (50 m)
• Elevation Readout: Front and rear LCDs
• Audio Control: Loud / Low / Off
• Capture Height: 3.1 in. (80 mm)
• Marking Notches: 2.36 in. (60 mm) below top of receiver
• Power Source: Two 1.5-V batteries (type LR6/AA)
• Battery Life: 40+ hours
• Low-Battery Indicator: Battery symbol on LCD
• Automatic Shutoff: 30 minutes after last laser strike
• Drop Resistance: 1.5 m (5 ft) onto concrete at room temperature
• Water Proof / Dust Proof: Yes - IP66
• Operating Temperature:–14 °F to 122 °F (–10 °C to 50 °C)
• Storage Temperature: –4 °F to 158 °F (–20 °C to 70 °C)

 
Customer Reviews (0)