The HL760U Digital Readout Receiver is a highly versatile laser receiver for basic and advanced leveling and aligning applications. It is designed for general, concrete and site preparation contractors. The HL760U measures elevations across the site, and is ideal for use with any rotating transmitter including red beam and green beam lasers.
 
The HL760U features a digital readout of elevation that provides a numeric display of ± 5 cm (± 2 inches). The readout is displayed on the large front and rear LCD’s and shows exactly how far the elevation is from on-grade for fast and easy cut/fill readings. Accurate measurements can be made without moving the rod clamp, saving time and increasing productivity. Selectable units of measure can be displayed meeting your application - mm, cm, ft, in or fractional inches.
 
A 12.7 cm (5 inch) reception height, more than double the industry standard, allows quick acquisition of the laser beam. An anti-strobe sensor prevents false readings from site strobe lights.
 
Radio communication allows working with another HL760U or HL760 for long range remote display and monitoring capability. A new function termed “Fingerprinting” links the receiver with a particular laser. Once the receiver is paired with the laser transmitter, the receiver has the ability to filter out other lasers that strike the receiver and only accept the laser that it is paired with. The HL760U also provides grade matching and PlaneLok capabilities with the 400 series lasers.
 
The Digital Readout Receiver is designed to survive the tough construction site conditions; it is totally waterproof and can withstand a drop of 3 meters (10 feet) onto concrete. The HL760U offers a 3-year “No Excuses” warranty.

FEATURES AND BENEFITS 
• Digital readout of elevation – not only will high or low arrows be displayed, but the exact distance from grade will be displayed, which eliminates the need to get “on-grade” to make measurements 
• Large 5-inch (12.7 cm) reception height acquires the beam quickly and makes it easy to stay in the beam 
• The HL760 / HL760U has an internal, long range 330 ft (100m) radius, high speed digital radio built inside that allows the receiver to communicate with any other HL760 / HL760U: LL300S, LL400HV, HV302, GL412N / GL422N laser transmitters
• Machine operators can monitor elevation shots taken by another person or foremen can monitor elevations and cut/fill readings from anywhere on the jobsite 
• Anti-strobe sensor stops construction strobe lights from setting off the receiver, and makes it easier to identify true laser beam signals 
• Multiple dead band setting allows adaptation to meet all your jobsite requirements 
• Dust and weatherproof housing withstand a drop of up to 10 ft (3 m) onto concrete for reduced downtime 
• Two clamp positions for cut/fill or excavation 
• Three-year “No Excuses” warranty 
• C70 Clamp with Bubble Vial included 
• Clamp comes with patented reversible jaw to allow a more solid fix to round or square rods 
• HL760U can also accept infrared and green beam lasers 
• When working in deep excavations the capture mode allows the user to pick up the laser elevation without having to adjust the receiver to the on-grade position –it tells you how far off on-grade you are.

HL760U USER GUIDE

TECHNICAL DATA
• Working Radius (Laser dependent):1 m - 460 m (3 ft - 1500 ft)
• Laser Detection Height: 127.0 mm (5“)
• Numeric Readout Height: 102.0 mm (4“)
• Internal Radio: Full 2-way communication, operation and security lock with paired device
• Radio Working Radius: Up to 220 m (720 ft), depending on orientation, conditions and paired device 
• Accuracy (Dead band): Ultra Fine: 0.5 mm, 0.02 in, 1/32 in Super Fine: 1.0 mm, 0.05 in, 1/16 in Fine: 2.0 mm, 0.10 in, 1/8 in Medium: 5.0 mm, 0.20 in, 1/4 in Coarse: 10.0 mm, 0.50 in, 1/2 in Calibration: 0.1 mm, 0.01 in, 1/64 in
• Reception Angle: ± 45° minimum

OUTFIT INCLUDES